Toronado.org

Howdy Toroites,

Anybody know where one can track down the mounts used between the torsion bar support brace and the frame rails? Theay are two separate cushions, upper and lower, with the upper having a steel sleeve molded to it.

Any suggestions are appreciated.

Not ever seen them except as salvage from decent cars. You can take the rubber parts (decent and undeformed) and gently bead blast them and then soak them in silicone. They come out good enough for re-use. The steel parts are less likely to be found intact but can be obtained from decent desert cars. CB

Thanks CB,