Hello,
I'm Orphé from Quebec, Canada. Last year I bought my dream car: a matching number 69 Toronado with 74k miles but I just started working on it. The car spent the last decades in a barn and except for the front end that is damaged and some surface rust, the frame, the floors and the engine are in a very good shape. The rims still have their bias-ply tires!
The car comes with a lot of cool options like the famous W34 high performance package, bucket seat & console, floor shifter, front disc brakes, HD cooling and 8-track player. The only options I miss are AC (canadian car...), rear defogger and power lock.
Engine serial no: 39M617439
Transmission serial no: 69-OM-2366 & 39M617439
VIN no: 394879M617439
I'm planning to work on the following in the next months in order to pass the inspection, body work will comes after:
- Replace all filters and oils
- Rebuild the power booster, brake calipers, master cylinder
- Rebuild the carburator
- Repair the radiator
- Replace the timing sprockets and chain (I purchased a Cloyes True Roller)
- Wrap the wire harness with Tesa tape
And I'll buy the Kanter steering kit when my budget will permit it.
I got the factory service manual, the Fisher manual, etc., and have a lot of knowledge since fix my cars for the last 20 years so I'll do as much as possible myself but I'll need advises from you guys for sure!
Cheers
Orphé
TOA #1366
69 W34
-
- Posts: 8
- Joined: Mon Oct 01, 2018 9:44 am
- TOA Membership Number: 1366
- Years Owned: 1969 Oldsmobile Toronado W34
1986 Oldsmobile Firenza Coupe
2004 Jaguar Vanden Plas
69 W34
- Attachments
-
- DSCF6382.JPG (360.08 KiB) Viewed 12679 times
-
- IMG_E3191_Dash.jpg (282.35 KiB) Viewed 12679 times
-
- IMG_3184_OM.jpg (343.08 KiB) Viewed 12679 times
- Otto Skorzeny
- Posts: 1721
- Joined: Fri Feb 28, 2014 12:41 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
Re: 69 W34
I would recommend against the Kanter products. My experience with steering and suspension parts from them is horrible. They are poor quality , Chinese crap that fell apart soon after installation. Rubber disintegrated, king pins wore out, etc.
Engine parts are of similar poor quality (rocker arms, push rods, etc). I am aware of many others who have had similar experiences with Kanter's abysmal quality parts. One friend's '57 Cadillac was on a stand being restored. The rubber suspension and steering parts from Kanter fell apart on the car before it ever made it on the road.
If you are going through the entire wiring harness, you may want to consider buying a new wiring harness from one of the following companies if your existing wiring is brittle or worn.
YNZ Yesterday's Parts Complete reproduction wiring harness for all makes and models
http://www.ynzyesterdaysparts.com/
909-798-1498
Rhode Island Wiring Service, Inc. Wiring harnesses for all years, all makes and models
567 Liberty Lane, PO Box 434
West Kingston, RI 02892
(401) 789-1955
http://www.riwire.com/
If you want to have your carburetor rebuilt, Daytona Parts does a fantastic job. They've rebuilt about 6 carbs for me, including the Q Jet in my Toronado. Daytona will also sell you a kit to do the job yourself if you desire.
Daytona Parts Company Carburetor parts and total rebuilds. Helpful information over the phone to tune or fix your own as well.
386-427-7108
http://www.daytonaparts.com
mail@daytonaparts.com
Ask for Tim Hewitt.
Engine parts are of similar poor quality (rocker arms, push rods, etc). I am aware of many others who have had similar experiences with Kanter's abysmal quality parts. One friend's '57 Cadillac was on a stand being restored. The rubber suspension and steering parts from Kanter fell apart on the car before it ever made it on the road.
If you are going through the entire wiring harness, you may want to consider buying a new wiring harness from one of the following companies if your existing wiring is brittle or worn.
YNZ Yesterday's Parts Complete reproduction wiring harness for all makes and models
http://www.ynzyesterdaysparts.com/
909-798-1498
Rhode Island Wiring Service, Inc. Wiring harnesses for all years, all makes and models
567 Liberty Lane, PO Box 434
West Kingston, RI 02892
(401) 789-1955
http://www.riwire.com/
If you want to have your carburetor rebuilt, Daytona Parts does a fantastic job. They've rebuilt about 6 carbs for me, including the Q Jet in my Toronado. Daytona will also sell you a kit to do the job yourself if you desire.
Daytona Parts Company Carburetor parts and total rebuilds. Helpful information over the phone to tune or fix your own as well.
386-427-7108
http://www.daytonaparts.com
mail@daytonaparts.com
Ask for Tim Hewitt.
-
- Posts: 8
- Joined: Mon Oct 01, 2018 9:44 am
- TOA Membership Number: 1366
- Years Owned: 1969 Oldsmobile Toronado W34
1986 Oldsmobile Firenza Coupe
2004 Jaguar Vanden Plas
Re: 69 W34
Thank you Otto,
Beside Fusick and Steele Rubber, do we have a good supplier of rubber that sells a complete repair kit? I understand that some parts like bushings are pretty hard to find
orphage
Beside Fusick and Steele Rubber, do we have a good supplier of rubber that sells a complete repair kit? I understand that some parts like bushings are pretty hard to find
orphage
- Otto Skorzeny
- Posts: 1721
- Joined: Fri Feb 28, 2014 12:41 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
Re: 69 W34
I don't know of anyone selling a complete set of rubber parts for Toronados.
There is a thread on this forum where someone details how he modified some rear spring bushings because he couldn't locate correct sized ones.
RockAuto.com has a lot of parts for these cars.
There is a thread on this forum where someone details how he modified some rear spring bushings because he couldn't locate correct sized ones.
RockAuto.com has a lot of parts for these cars.
-
- Posts: 17
- Joined: Sun Jan 20, 2019 1:38 pm
- TOA Membership Number: 1390
- Years Owned: 1952 MG
1949 Packard
1976 Eldorado
1966 Toronado
Re: 69 W34
I second Rock Auto. Also their prices are right. My car is a '66.
Who is online
Users browsing this forum: No registered users and 19 guests