Hi everyone I need a little help
Before I dropped the steering wheel column to remove the dash my turn signal both worked now only the drivers side works
I have tilt tel steering column
I can figure it out
Turn signals
-
- Posts: 83
- Joined: Wed Nov 09, 2016 1:17 pm
- TOA Membership Number: 24
- Years Owned: 1966 toronado
1981 toronado
1990 toronado
1991 toronado
1992 toronado
-
- Posts: 136
- Joined: Tue Aug 11, 2009 7:26 am
- TOA Membership Number: 100
- Location: New Haven, CT
Re: Turn signals
The turn signal switch in a '66 is external, driven by a cable. It's very likely that the switch has been knocked out of alignment.
Re: Turn signals
See to my tread, i repared that's
Re: Turn signals
You have to put it inside in the middle Position you can find how to do it in Service book and this is a very important cause if you don't to it like this you have a light only on one side
-
- Posts: 83
- Joined: Wed Nov 09, 2016 1:17 pm
- TOA Membership Number: 24
- Years Owned: 1966 toronado
1981 toronado
1990 toronado
1991 toronado
1992 toronado
Re: Turn signals
I’ll try that thank you
Who is online
Users browsing this forum: Majestic-12 [Bot] and 7 guests