Turn signals

Post your technical questions and information here.
Toronadotrofeo
Posts: 69
Joined: Wed Nov 09, 2016 1:17 pm
TOA Membership Number: 24
Years Owned: 1966 toronado
1981 toronado
1990 toronado
1991 toronado
1992 toronado

Turn signals

Postby Toronadotrofeo » Thu May 10, 2018 8:18 pm

Hi everyone I need a little help
Before I dropped the steering wheel column to remove the dash my turn signal both worked now only the drivers side works
I have tilt tel steering column
I can figure it out

Mikel
Posts: 118
Joined: Tue Aug 11, 2009 7:26 am
TOA Membership Number: 100
Location: New Haven, CT

Re: Turn signals

Postby Mikel » Fri May 11, 2018 9:34 am

The turn signal switch in a '66 is external, driven by a cable. It's very likely that the switch has been knocked out of alignment.

Jelonek
Posts: 97
Joined: Mon Nov 13, 2017 11:59 am
TOA Membership Number: 0
Years Owned: 1

Re: Turn signals

Postby Jelonek » Fri May 11, 2018 10:53 am

See to my tread, i repared that's

Jelonek
Posts: 97
Joined: Mon Nov 13, 2017 11:59 am
TOA Membership Number: 0
Years Owned: 1

Re: Turn signals

Postby Jelonek » Fri May 11, 2018 10:55 am

You have to put it inside in the middle Position you can find how to do it in Service book and this is a very important cause if you don't to it like this you have a light only on one side

Toronadotrofeo
Posts: 69
Joined: Wed Nov 09, 2016 1:17 pm
TOA Membership Number: 24
Years Owned: 1966 toronado
1981 toronado
1990 toronado
1991 toronado
1992 toronado

Re: Turn signals

Postby Toronadotrofeo » Fri May 11, 2018 4:30 pm

I’ll try that thank you


Return to “Technical Talk”

Who is online

Users browsing this forum: No registered users and 5 guests