hi guys,
i'm planning to completly overhaul the vacuum system on my toro (cruise control, brake booster and every other hose coming out of the intake manifold)
i got the manual with the vacuum hose routing..thats not the problem..but i cant find the sizes i need to use...like the diameter...the length is not that important...but the diameter is. so do u guys have any idea..or something like an overview?
i'm many miles away from my car..so i cant meassure myself...but i need to order them quickly.
thy and bye
size of vacuum hoses 1970 Toro
- Eightballz
- Posts: 125
- Joined: Mon Sep 27, 2010 2:15 pm
- TOA Membership Number: 826
- Years Owned: 1970 Olds Toronado GT
-
- Posts: 26
- Joined: Mon Feb 22, 2010 8:08 pm
- TOA Membership Number: 1035
- Years Owned: 1969
- Location: Sealy, TX
Re: size of vacuum hoses 1970 Toro
Any auto supply, NAPA, etc. will have the correct sizes. Take a sample of each with you. There are only about 3 different sizes.
HBARBEE 1969
- xgecko
- Posts: 454
- Joined: Wed Oct 13, 2010 9:21 pm
- TOA Membership Number: 831
- Years Owned: My first Toronado was a 1968 W-34 with the bucket seats and center console... (weeps gently) It was a New England rustbucket in 1982 after less than 14 years. So sad. But it is what infected me and before I knew it I had another '68, a '69, a '70 and eventually inherited a friend's '67 and another friends '73. After buying my brand new Grand Prix in 1988 I retired the last of my Toronados and pulled the 455 I had rebuilt along the way and put it into storage in a friend's barn where it is to this day.
In Mid September of 2010 I happened to see a repeat of the show where Jay Leno did his 66 Toronado and had an instant remission of the disease which resulted in my purchase of a 1969 in very good condition. I am now in the process of fully rehabilitating it and hope to have it on the road in the spring of 2011. - Location: Gig Harbor, WA
Re: size of vacuum hoses 1970 Toro
I found 1/8" and 3/16" hoses mostly on my car. There are a few larger such as the brake booster, and they are standard fuel line size. 3/8" I think, but might be 5/16".
Since line is cheap, buy 25 feet of each and you will have plenty.
Since line is cheap, buy 25 feet of each and you will have plenty.
I have my Fuel Injected Toronado. Life is good!
-
- Posts: 305
- Joined: Thu Nov 15, 2012 12:25 pm
- TOA Membership Number: 378
- Years Owned: 79 Toronado or Eldorado
size of vacuum hoses 1970 Toro
I have been buying Gates rolls on line from Amazon. My NAPA wanted to charge
me the one foot price for whole rolls, I said no thanks.
There seems to be a trend to cheat on hose materials, making them slightly
undersize. Bruce Roe
me the one foot price for whole rolls, I said no thanks.
There seems to be a trend to cheat on hose materials, making them slightly
undersize. Bruce Roe
- Otto Skorzeny
- Posts: 1720
- Joined: Fri Feb 28, 2014 12:41 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
Re: size of vacuum hoses 1970 Toro
Just like lumber. Half inch plywood is now 7/16". 3/4"ply is 23/32".
-
- Posts: 107
- Joined: Sun Dec 16, 2018 11:01 am
- TOA Membership Number: 0
- Years Owned: 1966 Toronado
Re: size of vacuum hoses 1970 Toro
You'll need more that 25' of the 1/8" vacuum hose
Marty, St. Louis, MO
2-1966 Toronados
Marty, St. Louis, MO
2-1966 Toronados
Who is online
Users browsing this forum: No registered users and 48 guests