A-Pillar rust damage and repair
-
- Posts: 16
- Joined: Tue Dec 11, 2018 11:52 am
- TOA Membership Number: 0
- Years Owned: 1966/67
- Location: Escondido, Ca
A-Pillar rust damage and repair
Have any of you had to deal with this issue? I've seen the video of the Toronado owner in Europe who had to completely fabricate the windshield channel but don't recall if there was A-pillar damage. There is a 1967 Toronado in the Los Angeles area that has noticeable damage at the base of the pillar, extending up approximately six inches. Are there repair panels for this or would a body shop have to make it? You can find it on CL. It is a black standard model. Here are a couple photos.
- Attachments
-
- Black 1967 Toronado in Sant Ana.jpg (188.71 KiB) Viewed 6801 times
-
- 1967 Toronado driver quarter.jpg (133.97 KiB) Viewed 6801 times
- Eightballz
- Posts: 125
- Joined: Mon Sep 27, 2010 2:15 pm
- TOA Membership Number: 826
- Years Owned: 1970 Olds Toronado GT
Re: A-Pillar rust damage and repair
thats a common issue with these cars. i have also seen rusted doors due to a-pillar leaking.
theres no repair panel available. you might try to use the repair panels for cutlass and modify them accordingly but this goes only for the cowl area. a-pillar needs to be custom made
theres no repair panel available. you might try to use the repair panels for cutlass and modify them accordingly but this goes only for the cowl area. a-pillar needs to be custom made
Who is online
Users browsing this forum: No registered users and 40 guests