Hello everyone I'm restoring the dash of my 1966 toronado and I want to redo the bezel where the wiper lights cruise etc... or get new ones does anyone know how to redo them or how to the lettering back on them after a poslish and putting fine grain back on
If anyone can help that would be great
Dash bezels 1966 1967 toro
-
- Posts: 83
- Joined: Wed Nov 09, 2016 1:17 pm
- TOA Membership Number: 24
- Years Owned: 1966 toronado
1981 toronado
1990 toronado
1991 toronado
1992 toronado
-
- Posts: 54
- Joined: Thu Jul 03, 2014 7:53 pm
- TOA Membership Number: 0
Re: Dash bezels 1966 1967 toro
Mine were really dirty and dingy and cleaned up with Windex.
If your lettering is worn off there isn't much you can do.
I did see some repro's on ebay but the guy put right in his listing that the font wasn't correct.
Might be better than nothing if yours are really bad.
Brian
If your lettering is worn off there isn't much you can do.
I did see some repro's on ebay but the guy put right in his listing that the font wasn't correct.
Might be better than nothing if yours are really bad.
Brian
-
- Posts: 83
- Joined: Wed Nov 09, 2016 1:17 pm
- TOA Membership Number: 24
- Years Owned: 1966 toronado
1981 toronado
1990 toronado
1991 toronado
1992 toronado
Re: Dash bezels 1966 1967 toro
Thank you
I was thinking of getting the bezel Repolished in the same finish then get a vinyl guy to make a stencil made up paint and clear coat the whole thing
It will be a lot of work but worth it
I wish I could find tail panel in good condition
I was thinking of getting the bezel Repolished in the same finish then get a vinyl guy to make a stencil made up paint and clear coat the whole thing
It will be a lot of work but worth it
I wish I could find tail panel in good condition
Who is online
Users browsing this forum: No registered users and 88 guests