Page 1 of 5
66 Parts For Sale
Posted: Fri Jun 28, 2019 5:22 am
by Tuco
I just picked up another 66. This one is too far gone for resto but has lots of good parts.
Too much to list. Let me know what you need.
Re: 66 Parts For Sale
Posted: Sun Jul 07, 2019 11:39 am
by wim 66toronado
Hi, need an outside leftside remote mirror and a good interior mirror, can you help me??
Thanks Wim
Re: 66 Parts For Sale
Posted: Sat Jul 13, 2019 4:45 am
by Tuco
Sorry but the outside mirror is not remote and the inside mirror is missing.
Re: 66 Parts For Sale
Posted: Sun Jul 14, 2019 10:25 am
by wim 66toronado
oke, thanks.
Re: 66 Parts For Sale
Posted: Wed Jul 17, 2019 11:32 am
by Willysnut1959
Do you have original carb; transmission kickdown switch; throttle cable; or choke spring, cover, and rod?
Marty
636-458-4402
Re: 66 Parts For Sale
Posted: Sat Aug 24, 2019 11:20 am
by Blu68caddy
Hello
I am looking/needing the left rear quarter glass. The trim chrome is deteriorated to the point it will not correctly hold the weatherstrip seal. I am not sure if just the chrome piece can be separated without the window… Thank you in advance. Mark Morris 703-489-6159
Re: 66 Parts For Sale
Posted: Sun Aug 25, 2019 5:55 pm
by Otto Skorzeny
Hi Mark,
Call John Dorcey. He has 50 parts cars.
viewtopic.php?f=49&t=1723
Re: 66 Parts For Sale
Posted: Mon Aug 26, 2019 7:15 am
by Tuco
Yep I have one. I’ll call you.
Re: 66 Parts For Sale
Posted: Sun Sep 08, 2019 6:06 am
by Francois
Hi Tuco,
I'm looking for some parts missing on mine, any chance you have the two green pieces that are missing on the picture ?
Also the red one is quite rusty, the is the only spot on the car, do you know if it can be changed, it seems to be a part of a bigger assembly...
It's on the passenger's side.
Thanks, François.
Re: 66 Parts For Sale
Posted: Sun Sep 08, 2019 6:47 am
by Tuco
The part that’s rusted is the bottom side of the inner fender. The battery sits above there in the engine compartment. They all rust out there from battery acid. I had bought another set of inner fenders and cut the good portion of the driver side and shaped it to fit pass side and welded it in.
I doubt my parts car has a good section but I’ll check. I’ll also check for the brace.
May be Monday before I can get back to you.