1966 Toronado Parts Car

All parts for sale may be listed here by forum members.
User avatar
Doc Hubler
Posts: 355
Joined: Thu Sep 27, 2012 9:37 pm
TOA Membership Number: 992
Years Owned: 1967

Re: 1966 Toronado Parts Car

Postby Doc Hubler » Mon Nov 16, 2015 12:46 pm

Sure, I can cut you a pair. I used nylon reinforced rubber of the same thickness as the originals. I take it you know exactly where this attach.

Otto Skorzeny
Posts: 774
Joined: Fri Feb 28, 2014 12:41 pm
TOA Membership Number: 0
Years Owned: 1966 Toronado

Re: 1966 Toronado Parts Car

Postby Otto Skorzeny » Mon Nov 16, 2015 1:55 pm

I have an idea were they go but have never seen any in person. (In fact, my Toronado is the first one I've seen in person in a decade or so. I have yet to see another.)

Since I've seen pictures of them on other cars, I imagine I could figure it out just by looking for screw holes that match up with the pattern.

If you would post pictures of them on your car, that would be great.

Are they about 1/4" thick or so?

brian66toro
Posts: 49
Joined: Thu Jul 03, 2014 7:53 pm
TOA Membership Number: 0

Re: 1966 Toronado Parts Car

Postby brian66toro » Mon Aug 22, 2016 5:30 am

Looking for a set of seat track covers.

Thanks,

Brian rachlin@comcast.net

User avatar
Doc Hubler
Posts: 355
Joined: Thu Sep 27, 2012 9:37 pm
TOA Membership Number: 992
Years Owned: 1967

Re: 1966 Toronado Parts Car

Postby Doc Hubler » Thu Aug 25, 2016 4:06 pm

I don't know if there's anything left of this car. I am looking for a couple of items. One is a good brake pedal. The rubber is fine on mine, but the stainless part is worn through. As far as I'm aware, these are not reproduced.

Also, if this car happens to be equipped with cruise control, I need a new cutoff switch that shuts off CC when teh brake pedal is used.


Return to “For Sale: Parts”

Who is online

Users browsing this forum: No registered users and 1 guest