Custom Lunati Roller cam

All parts for sale may be listed here by forum members.
bluecab
Posts: 190
Joined: Tue Mar 08, 2011 7:52 am
TOA Membership Number: 0
Years Owned: restoring a '66, have Moto Guzzi motorcycles, an Audi convertible and a bunch of other junk
Location: Massachusetts/Rhode Island

Custom Lunati Roller cam

Postby bluecab » Mon Sep 09, 2013 3:51 pm

Used only for mock-up in my 425 hydraulic roller conversion.
Base circle was a bit too big.

221/221 @.050 on 110 LSA

.542/.544 lift

Would be good in a 455 and ?

$250 or BO ( cost $325.)

PM with questions,

David

bluecab
Posts: 190
Joined: Tue Mar 08, 2011 7:52 am
TOA Membership Number: 0
Years Owned: restoring a '66, have Moto Guzzi motorcycles, an Audi convertible and a bunch of other junk
Location: Massachusetts/Rhode Island

Re: Custom Lunati Roller cam

Postby bluecab » Thu Sep 04, 2014 4:10 pm

Bump.

Still here. Still new.

All offers considered!

andy96
Posts: 3
Joined: Tue Oct 14, 2014 3:22 pm
TOA Membership Number: 0
Years Owned: 1968 Oldsmobile Toronado

Re: Custom Lunati Roller cam

Postby andy96 » Tue Oct 14, 2014 3:31 pm

what is the duration and overlap...that lift is a bit much. i have a 455 and wanted to take it to just above the w34 specs

bluecab
Posts: 190
Joined: Tue Mar 08, 2011 7:52 am
TOA Membership Number: 0
Years Owned: restoring a '66, have Moto Guzzi motorcycles, an Audi convertible and a bunch of other junk
Location: Massachusetts/Rhode Island

Re: Custom Lunati Roller cam

Postby bluecab » Tue Dec 02, 2014 10:12 am

Sorry, I did not see your earlier post.

These are the specs from the cam card in the box.


Lunati P/N 20429909

Grind 18-R221G-R221C

Lift At Valve: .545 intake .542 exhaust

Advertised Duration: 285 intake 279 exhaust

Duration at .050 lift 221 intake 221 exhaust

Lobe Separation 108 degrees

Custom ground for my 425 application using hydraulic rollers, base circle was too big.

Make offer

bluecab
Posts: 190
Joined: Tue Mar 08, 2011 7:52 am
TOA Membership Number: 0
Years Owned: restoring a '66, have Moto Guzzi motorcycles, an Audi convertible and a bunch of other junk
Location: Massachusetts/Rhode Island

Re: Custom Lunati Roller cam

Postby bluecab » Wed Jan 28, 2015 4:57 pm

TTT


Return to “For Sale: Parts”

Who is online

Users browsing this forum: No registered users and 1 guest