I need a dashboard (metal part). The area under the windshield is gone... see pic.
Also the body parts of the front windshield frame under that dash part are beyond repair.
Last part is the structure of the body in the lower area of the rear glass. I don't know the proper names for those parts, maybe someone has an idea?
Thx a lot
Harald
Need parts for a 1966 restauration
- harascho
- Posts: 106
- Joined: Fri Oct 19, 2012 9:04 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado Deluxe owned 1 year
Need parts for a 1966 restauration
- Attachments
-
- IMG_8323.jpg (75.57 KiB) Viewed 10467 times
-
- dash_1.jpg (78.81 KiB) Viewed 10467 times
-
- dash_2.jpg (61.47 KiB) Viewed 10467 times
- harascho
- Posts: 106
- Joined: Fri Oct 19, 2012 9:04 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado Deluxe owned 1 year
Re: Need parts for a 1966 restauration
pic of that rear window part
harascho
harascho
- Attachments
-
- rear_glass_1.jpg (69.49 KiB) Viewed 10465 times
-
- Posts: 475
- Joined: Fri Mar 26, 2010 8:29 am
- TOA Membership Number: 839
- Years Owned: 1982 Chevrolet El Camino
1986 Pontiac Fiero
1966 Oldsmobile Toronado
Re: Need parts for a 1966 restauration
I had the same issue with my windshield when I boight my '66. After spending a year looking for a replacement, it became apparent it wasn't going to happen. I had to make my own. It really wasn't to difficult, and there's a whole big thread on here about how I did it somewhere... If I remember when I get home, i'll try to find you a link.
TOA #839
- harascho
- Posts: 106
- Joined: Fri Oct 19, 2012 9:04 pm
- TOA Membership Number: 0
- Years Owned: 1966 Toronado Deluxe owned 1 year
Re: Need parts for a 1966 restauration
that sounds great. Some advice is very welcome.
Thx in advance
Harald
Thx in advance
Harald
-
- Posts: 475
- Joined: Fri Mar 26, 2010 8:29 am
- TOA Membership Number: 839
- Years Owned: 1982 Chevrolet El Camino
1986 Pontiac Fiero
1966 Oldsmobile Toronado
Re: Need parts for a 1966 restauration
viewtopic.php?f=7&t=458&p=1342&hilit=Windshield+metal#p1342
Here we go You could probably weld yours since you've got your interior all torn out. I didn't want to do that. I've had it patched this way for a couple years now, and it seems to be holding strong.
Here we go You could probably weld yours since you've got your interior all torn out. I didn't want to do that. I've had it patched this way for a couple years now, and it seems to be holding strong.
TOA #839
Return to “Wanted: Parts and Misc”
Who is online
Users browsing this forum: No registered users and 21 guests