Page 1 of 1

1966 California Toronado vacuum line routing

Posted: Sun Jul 02, 2017 5:18 pm
by Ourkid2000
Good day folks! First post......great to be a member!

My father and I are working on a 1966 Toro project. This car has been in the family for about 45 years now and we are looking for some info to get started.

We had an engine fire on this car about 3 years ago and the vacuum lines took a serious beating. We have an original shop manual with a vacuum line routing image however ours appears to be different as it has a AiR pump (Cali car).....many of the lines don't follow the same route. We have to replace quite a few of them.

If any of you have a 66 California Toronado with air conditioning, would it be possible to get some photos of your underhood or something? Any info at all would help honestly.

Cheers!

Re: 1966 California Toronado vacuum line routing

Posted: Sun Jul 02, 2017 5:44 pm
by RussBarnes
I have a '67 Toro from CA with A.I.R. and A.C. Would that help? BTW, my system will be removed since I live in TN, so if you need anything, let me know.

Re: 1966 California Toronado vacuum line routing

Posted: Sun Jul 02, 2017 5:46 pm
by Ourkid2000
Hey thanks for the quick reply. Good question. Did the 67 still use the 425? I would imagine it would be very similar if so.

Re: 1966 California Toronado vacuum line routing

Posted: Sun Jul 02, 2017 5:50 pm
by RussBarnes
Yes it's the 425, but it will take one of thr Toro Gurus to say if it's the same.