66 Toro driver's side rubber floor mat, tail light fillers & door pull

Post your parts, literature, etc. requests here.
Freddy67
Posts: 5
Joined: Thu Oct 29, 2015 1:08 pm
TOA Membership Number: 0
Years Owned: 1966

66 Toro driver's side rubber floor mat, tail light fillers & door pull

Postby Freddy67 » Thu Jul 21, 2016 12:28 pm

Hello.

I'm looking for three items for my 66:

1) the rubber floor mat for the driver's side front, the one that goes in the framing attached to the floor;

2) the small, square red and chrome fillers that fit between the tail lights and the rear license plate well; and

3) a door pull for the driver's side door. Mine is the later 66 style that fits "in-line" with the interior chrome. Early models place the pull just below this trim.

Please PM me with as much detail as possible.

Thanks,

Fred

User avatar
Otto Skorzeny
Posts: 1721
Joined: Fri Feb 28, 2014 12:41 pm
TOA Membership Number: 0
Years Owned: 1966 Toronado

Re: 66 Toro driver's side rubber floor mat, tail light fillers & door pull

Postby Otto Skorzeny » Thu Jul 21, 2016 2:52 pm

1. The floor mat is not reproduced but a reasonable facsimile is available. It won't have the perimeter outline but will look good enogh to pass. There is a picture of it on this site. I'll try to find it.

I don't know the source but I think you might find it at a company like Mcmaster-Carr.

2. I may have the little squares.

For the door pull and other used parts, you should acquaint yourself with John Dorcey in Las Vegas. (702-690-6077) He has 50 66-70 parts cars. I bought a bunch of stuff from him and he's a straight shooter.

User avatar
Otto Skorzeny
Posts: 1721
Joined: Fri Feb 28, 2014 12:41 pm
TOA Membership Number: 0
Years Owned: 1966 Toronado

Re: 66 Toro driver's side rubber floor mat, tail light fillers & door pull

Postby Otto Skorzeny » Thu Jul 21, 2016 2:55 pm

Here's a link to a recently restored '66 with new rubber mat. The first photo is my original car. Notice the orientation of lands and grooves in the rubber. I think the restorer should have placed the rubber in such a way as to mimic the factory installation instead of installing it 90* off.

viewtopic.php?f=5&t=1664

User avatar
Otto Skorzeny
Posts: 1721
Joined: Fri Feb 28, 2014 12:41 pm
TOA Membership Number: 0
Years Owned: 1966 Toronado

Re: 66 Toro driver's side rubber floor mat, tail light fillers & door pull

Postby Otto Skorzeny » Thu Jul 21, 2016 3:55 pm

I did a quick search of McMaster-Carr's website and found this rubber mat. A 24"x48" piece is only $26.00

http://www.mcmaster.com/#standard-rubbe ... s/=13dtyok

User avatar
Otto Skorzeny
Posts: 1721
Joined: Fri Feb 28, 2014 12:41 pm
TOA Membership Number: 0
Years Owned: 1966 Toronado

Re: 66 Toro driver's side rubber floor mat, tail light fillers & door pull

Postby Otto Skorzeny » Thu Jul 21, 2016 4:00 pm

Regarding the door pull, every GM line had some version of that for many years. Perhaps Year One has something that would work.


Return to “Wanted: Parts and Misc”

Who is online

Users browsing this forum: No registered users and 20 guests