Toronado.org

Here's a tip! When mating the TH425 and the block back together, MAKE SURE that the torque convertor is ALL THE WAY IN . It seemed to be in, but it wasn't! I was getting interference on the trans case and then saw the small relief cut that GM put on the case. Another 3/8 inch or so deeper went the ...

Here's a tip! When mating the TH425 and the block back together, MAKE SURE that the torque convertor is ALL THE WAY IN . It seemed to be in, but it wasn't! I was getting interference on the trans case and then saw the small relief cut that GM put on the case. Another 3/8 inch or so deeper went the c...

A symmetrical archie pair!

If they're flappy,

It's gettin' air...

Another...

Some of the chassis photos. Can't get the rest, and I have little patience for computer nonsense!

Fort some reason the chassis pics say file too large so those will have to wait...but they are reunited. Engine trans going in...maybe tomorrow!

Finally bringing some parts back together...

Not sure, maybe a vent hose going up the neck to keep the tank pressure stable?

Oh it's a real treat...even with the body off the chassis. I used a good amount of silicone spray a good solid fish-tape. Did both the fuel hose and return hose at once. Make sure that the back set enters into the larger hole of the body rail that lines up on the inside of the end of the actual frame.

Hi, I might have one if you're interested. Pick up only though in Michigan.

PM me if you get the message.

Thanks