Search found 363 matches
- Thu Aug 25, 2016 4:24 pm
- Forum: Technical Talk
- Topic: 66 Toro passenger axle pt. 2
- Replies: 5
- Views: 8867
Re: 66 Toro passenger axle pt. 2
Thad, Do you want the proportioning valve (balance valve) I have for a 68 Toro? It basically is the same as the 1967 version. They changed for 1969. It comes with the clip to hold it to the frame and has been rebuilt and ready for installation. Picture included here. Contact me directly. WOuld like ...
- Thu Aug 25, 2016 4:06 pm
- Forum: For Sale: Parts
- Topic: 1966 Toronado Parts Car
- Replies: 24
- Views: 69292
Re: 1966 Toronado Parts Car
I don't know if there's anything left of this car. I am looking for a couple of items. One is a good brake pedal. The rubber is fine on mine, but the stainless part is worn through. As far as I'm aware, these are not reproduced. Also, if this car happens to be equipped with cruise control, I need a ...
- Wed Aug 24, 2016 9:46 am
- Forum: Technical Talk
- Topic: Front Wheel Bearings
- Replies: 8
- Views: 14590
Re: Front Wheel Bearings
Well, I guess I'll find out soon enough. I did use Kanter's kit for my car -- replaced all suspension bushings and all the bearings. They looked like exact reproductions of the originals. Let's be honest about this. Rock Auto probably uses the same supplier for these items. Neither of those companie...
- Tue Aug 23, 2016 1:50 pm
- Forum: Technical Talk
- Topic: Front Wheel Bearings
- Replies: 8
- Views: 14590
Re: Front Wheel Bearings
Those don't come apart per se. Order them from Kantor. If you're talking about the entire steering knuckle/front suspension, you'll have to get a service manual or parts book. They are readily available on ebay.
- Mon Aug 22, 2016 9:16 pm
- Forum: Technical Talk
- Topic: Vacuum Diagram for Comfortron
- Replies: 0
- Views: 6146
Vacuum Diagram for Comfortron
Hope this may be helpful for those with Comfortron systems. THis is a diagram of the vacuum tubing that is easier to read than that in the service manual. If you see corrections that are needed, please let me know.
- Mon Aug 22, 2016 3:37 pm
- Forum: Technical Talk
- Topic: Front Wheel Bearings
- Replies: 8
- Views: 14590
- Mon Aug 22, 2016 3:36 pm
- Forum: Technical Talk
- Topic: Front Wheel Bearings
- Replies: 8
- Views: 14590
Re: Front Wheel Bearings
I think the bearing unit is the same: this is 66-68. They are pressed in -- you need a press to get them out and replace with the new ones.
- Sun Aug 21, 2016 4:08 pm
- Forum: Technical Talk
- Topic: 66 Toro AIR System -- friend or foe?
- Replies: 11
- Views: 15823
Re: 66 Toro AIR System -- friend or foe?
Keep it stock, you won't regret it. Also that air cleaner is special to the AIR system.
- Thu Aug 18, 2016 10:06 pm
- Forum: Technical Talk
- Topic: Decode Data Plate 66 Toro
- Replies: 2
- Views: 5729
Re: Decode Data Plate 66 Toro
THose will only be for options for which a hole was punched somewhere on the body to install an option, but no drive train parts. Bodies were built at Euclid, OH, then shipped to Lansing, MI for final assembly. I'll have to try and look these up. I thought I had a number of them figured out. The EXS...
- Thu Aug 18, 2016 10:01 pm
- Forum: Technical Talk
- Topic: Decode 1966 Data plate?
- Replies: 26
- Views: 38823
Re: Decode 1966 Data plate?
Paint code D Lucerne Mist (13042)
Trim code 052 is Green cloth/vinyl Strato Bench seat
Trim code 052 is Green cloth/vinyl Strato Bench seat