Search found 37 matches
- Tue Mar 02, 2010 11:03 pm
- Forum: Technical Talk
- Topic: 66 toro exhaust bolts
- Replies: 1
- Views: 6344
Re: 66 toro exhaust bolts
Are you referring to the exhaust manifold to intermediate pipe flange bolts? If so, these are special bolts and are spring loaded to allow for engine torque load. This keeps the graphite/asbestos gasket/ring from self destroying as the engine moves under load in the mounts. I have samples and can ge...
- Mon Dec 07, 2009 11:09 pm
- Forum: Introductions
- Topic: New to fourm 1966 Tornodo
- Replies: 3
- Views: 9745
Re: New to fourm 1966 Tornodo
Howdy! Sounds like you have a nice Toro! We'd love to hear more about it. Also, if you have the original or early replacement bias ply tires, they should have TFD (Toronado Front Drive) on them. If so, HANG on to them, regardless of condition. They can be worth a few bucks to somebody if not for his...
- Wed Dec 02, 2009 8:48 pm
- Forum: Technical Talk
- Topic: 1970 GT fuel Sending unit
- Replies: 3
- Views: 8342
Re: 1970 GT fuel Sending unit
Hi Fred, Chances are they are not the same unit with the change from 70 to 71 to a full frame and therefore different tank/unit, but you never know. The best thing is to cross-reference part numbers. Also, there is a guy advertising in Hemmings that rebuilds them. If you can't reference a part# let ...
- Wed Oct 21, 2009 8:42 pm
- Forum: Introductions
- Topic: Hey...
- Replies: 2
- Views: 8887
- Fri Sep 04, 2009 7:03 pm
- Forum: Technical Talk
- Topic: Body off frame restoration - mounts??
- Replies: 6
- Views: 14980
Re: Body off frame restoration - mounts??
Bill/Hoog, I may have a solution if Steel Rubber falls through. Of course, I'll need half way decent samples too. There is place called "The House of Rubber", or at least there used to be near me, that did ANYTHING in rubber of all kinds! I was thinking that I could get "large" b...
- Fri Aug 14, 2009 10:01 pm
- Forum: Technical Talk
- Topic: Dash lube
- Replies: 6
- Views: 12937
Re: Dash lube
Hi Mike, Schurkey is onto it....as far as the cable lube is concerned. Also the drive gear in the governor should be inspected. I have a few dozen speedometers laying about. I took a few pics of one I use for a paper weight. Notice the worm gears, speedo barrel shaft (and end adjustment, similar to...
- Tue May 19, 2009 10:20 pm
- Forum: Introductions
- Topic: Just Joined!
- Replies: 1
- Views: 7916