Search found 9 matches
- Wed Dec 08, 2021 3:32 pm
- Forum: Technical Talk
- Topic: Coolant in oil
- Replies: 10
- Views: 12800
Re: Coolant in oil
the surfaces of the heads looked Ok surface as after sanding, I checked the linearity before assembly, bolts Ok . Tomorow I check head again maybe I found leak……
- Wed Dec 08, 2021 2:36 pm
- Forum: Technical Talk
- Topic: Coolant in oil
- Replies: 10
- Views: 12800
Re: Coolant in oil
I'm looking for the reason, everything is fine from the water pump. I'll take the heads off tomorrow. I bought a toro from the owner's son owner died before the renovation was complete and I am putting it together. It looks like the engine was renovated with a new shaft, cylinder heads after regency...
- Tue Dec 07, 2021 1:06 pm
- Forum: Technical Talk
- Topic: Coolant in oil
- Replies: 10
- Views: 12800
Re: Coolant in oil
Unfortunately, the new gasket is in accordance with the instructions and the coolant is leaking again from the plug in the oil pan. I poured the fluid without the suction manifold below the holes and it started to drip
- Tue Nov 30, 2021 1:14 pm
- Forum: Technical Talk
- Topic: Coolant in oil
- Replies: 10
- Views: 12800
- Tue Nov 30, 2021 12:30 am
- Forum: Technical Talk
- Topic: Coolant in oil
- Replies: 10
- Views: 12800
Re: Coolant in oil
Many thanks for the answer, refer to your post, my mistake I used single gaskets and it probably caused a spill, new gasket ordered.
compression Ok, heads after regeneration mounted with new gaskets.
I will do everything according to your advice, I hope it will be ok.
compression Ok, heads after regeneration mounted with new gaskets.
I will do everything according to your advice, I hope it will be ok.
- Mon Nov 29, 2021 1:13 am
- Forum: Technical Talk
- Topic: Coolant in oil
- Replies: 10
- Views: 12800
Coolant in oil
Hello, I am finishing Toro 1966 , engine rebuilt and assembled, seems to be correctly. but, after pouring coolant into the system and making a few turns from the starter without firing the engine, I noticed that the liquid was mixed with the oil. the engine is in emulsion, the level has doubled. new...
- Fri Sep 17, 2021 4:12 am
- Forum: Wanted: Parts and Misc
- Topic: Flywheel cover
- Replies: 1
- Views: 6614
- Tue Aug 31, 2021 11:38 pm
- Forum: Wanted: Parts and Misc
- Topic: Valve lifters
- Replies: 2
- Views: 7489
- Mon Aug 30, 2021 2:16 pm
- Forum: Wanted: Parts and Misc
- Topic: Valve lifters
- Replies: 2
- Views: 7489
Valve lifters
Helo , I looking for valve lifters to Toronado 1966 diameter , 921. I need set 16 pcs. Someone can help me ?